The indicator light on modern air purifiers is one of the most convenient features of these models. It takes away most of the guesswork you would need to do if there is any problem with the device. Well, the Homedics air purifier has such kind of indicator as well.
But if you do know what the indicator states, you might find yourself wondering why is my Homedics air purifier blinking red.
Long story short: the Homedics air purifier flashing red light signal states that there is a problem with the UV-C light. It might have burnt out, and you might need to replace it.
However, is that all that answers the question of why is there a red light on my Homedics humidifier? To know that, you should stick with this discussion until the end!
Why Is The Light On The Homedics Air Purifier Blinking Red?
The indicator of the Homedics air purifiers is connected to the UV-C bulb of the device. This indicator offers the users information if anything wrong happens to the bulb.
For example, the bulb can burst out over time and make the air purifier not work optimally. That is when you will see the indicator blinking red.
Now, you might wonder what the UV-C light does on the Homedics air purifier. Well, the light produces a short wave of ultraviolet light. With this light, the air purifier can inactivate the airborne pathogens that float around in the air.
Along with that, the UV-C light makes the air purifier capable of inactivating the microorganisms. That includes bacteria, viruses, and molds.
By doing so, UV-C light aims to lower the impurities that may float in your room’s air. Eventually, you will end up with clean and healthy air in the indoor environment.
In short, the light is there to increase the purifying efficiency of the Homedics air purifier. And it increases the purifying efficiency of the device.
How To Fix The Red Blinking Light On Homedics Air Purifiers?
Asking yourself how do I reset my Homedics air purifier to get rid of the blinking light? Well, all you need to do is replace the UV-C light. That will make the red blinking light go away.
And to replace the UV-C light, you need to go through these simple steps:
Step 1: Turn the Homedics air purifier off
Before anything else, you should turn the air purifier off. Simply pressing and holding the power button for five seconds should do the trick for most devices.
But you should check the manual of your model to be sure about the exact process. It might just need one press, and pressing and holding might do another task.
But turning the air purifier off will not be enough. You should also unplug the power cord from the main outlet. This step is vital as it provides extra safety when working with the device.
Step 2: Take the UV-C light cover out
You must take the HEPA-type filter out before getting to the UV-C light. Take it out, and you should be capable of seeing the UV-C light and its cover. You will need to use a Phillips head screwdriver to take it out.
Unscrew the fasteners that are on the UV-C bulb and keep them safe. If you lose them, you will need to opt for replacements. Then, take the cover out.
Step 3: Remove the defective UV-C bulb
Once you take the cover off, you will expose the UV-C bulb. And it should have noticeable damages on it. Carefully take it out of the housing. Make sure not to put too much force on it, or you will break the broken bulb more.
Although it might not seem like you are doing much, getting the small pieces out can be pretty hard.
For that reason, be extra careful while getting the bulb out. If needed, wear a glove, so you do not cut yourself while handling the broken light.
Step 4: Install the new UV-C light
After getting the old one out of the device, put the new one in place. Again, you should be extra careful while putting it in.
Hold it on both ends and carefully push it into the slots. Do not put too much pressure while pushing it, or you will risk breaking the new and pristine UV-C light.
With all of that done, you just have to put things back in place. Put the cover back in, place the two screws and fasten them up. Then, place the HEPA-type filter and plug the power cord into the power outlet.
Now, if the red blinking light is still there, you should reset the indicator light. To do so, you need to press and hold the Clean Filter indicator for a couple of seconds. The air purifier should reset, and you will notice that the red blinking light is not there anymore.
Final Words
Are you still wondering why is my Homedics air purifier blinking red? Well, the air purifier will show such kind of behavior when there are issues with the UV-C bulb.
And as you can see, you really do not have to go through too many hassles when it comes to replacing it. So, just follow the steps and get it fixed immediately!
Last Updated on October 24, 2022